Volume 62, 2020

BOOK REVIEW Martin Bajus
Petrochemistry

A plausible Seismic Velocity-Effective Stress Transform for Overpressure Prediction: A case study of the Central Swamp Depobelt, Onshore Niger Delta, Nigeria
J. E. Asedegbega, A. I. Opara, M. Omudu, and N. N. Onu, pp. 280-291

Comparison Study between Drilling with Casing and Conventional Drilling Techniques in the Western Desert
Mostafa Ibrahim, Mohamed S. Farhat and Taher El Fakharany, pp. 273-279

Investigating the Effect of Pyrolysis Parameters on Product Yields of Mixed Wood Sawdust in a Semi-Batch Reactor and its Characterization
Mohamed R. O. Ali, Ahmed Gaber H. Saif, Seddik S. Wahid, pp. 255-272

Abnormal Pore Pressure Prediction Using Modified Eaton Model. A Case of Zeta Field, Onshore-Shelf, Niger Delta Basin
I. A. Okocha, L. I. Mamah, C. G. Okeugo, pp. 244-254

Energy Potential of Malaysian Forestry Waste Residues
Bemgba B. Nyakuma, Olagoke Oladokun, Tertsegha J-P. Ivase, Samuel Moveh, Victor O. Otitolaiye, pp. 238-243

Effects of Water-Cut and Gas-Oil-Ratio on Oil and Gas Recovery Factors Optimization
S. O. Salufu, S .O. Isehunwa, and J. Braimah, pp. 233-237

Troubleshooting Identification and Upset Conditions Effect of LNG Plant
Mohamed Halafawi, Ayham Mhanna, Mirna Charif, Lazăr Avram, pp. 220-232

Field Study of Drilling Horizontal Wells in Abu Rudies Field, Gulf Of Suez, Egypt
Kareem Ahmed Mohamed Hassan, Shouhdi El Maghraby Shalaby, Mohamed Shehata Farahat, pp. 209-219

Comprehensive Study on Improving Proppant Flow-back Control Using Resin Coated and Rod-shaped Proppant in Egyptian Fractured Wells
Ahmed A. Gawish, Said K. Elsayed, Ahmed A. Elgibaly, and Mohamed A. Heikal, pp. 200-208

Possibility of Producing Plastic Lubricants by Thermal Destruction of Solid Domestic Wastes
Andrey Grigorov, Oleg Zelenskii, Alexey Sytnik, Ivan Nahliuk, pp. 195-199

Comparison between Well Control Methods During Oil Well Drilling for Small and Large Open Hole in Egypt Western Desert by Using Drilling Simulator
Mahmoud Fathi, Yahia M. Al-Nady, Taher El-Fakharany, pp. 186-194

B4C/g-C3N4 p-n Heterojunction with Enhanced Photoactivity for the Degradation of Aqueous Pollutants
Chenjing Sun, Ruishuo Li, Rui Wang, pp. 178-185

Influence of the Properties Raw Coal Materials and Coking Technology on the Granulometric Composition of Coke
Message 1. Analysis of Changes in Particle Size Distribution of Coke on the Example of the Coke Plant in Krivyi Rig
V. P. Lyalyuk, E. O. Shmeltser, D. A. Kassim, I. A. Lyakhova, M.V. Kormer, pp. 173-177

Using Dual Fracturing Technique to Control Hydraulic Fracturing Propagation
Ahmed Ahmed Gawish, Said Kamel Elsayed, Mohamed Adel Gabry, pp. 163-172

Development of Coal Pillar In-Situ Model to Minimize Surface Subsidence during Underground Coal Gasification with Assessment of Synthetic Gas Yield
Wahida Akhtar, Hridita Ferdous, pp. 156-162

Production Forecasting by Decline Curve Analysis: A Case Study of Habiganj Gas Field, Bangladesh
Md Sumon Chowdhury, Md Shaheen Shah, pp. 149-155

Identification the Regularities of Influence of the Diesel Fuels Composition on the Efficiency of Low-Temperature Additives Action
Alina M. Orlova, Ilya A. Bogdanov, Nyurguyaana P. Nikonova, Maria V. Kirgina, pp. 142-148

Rheological Evaluation of Composite Natural Polymers as Rheology Control Additive in Water-Based Drilling Fluid
M. O. Jimoh, A. O. Arinkoola, T. O. Salawudeen, M. O. Daramola, pp.129-141

Optimum Well Trajectory Design And Optimization Based On Numerical Optimi-zation Method PSO Algorithm and Wellbore Stability
Muhammad Tahir, Mohammed Halafawi, Marian Wiercigroch, and Lazăr Avram, pp. 114-128

Production and Economic Analysis of Enhanced Oil Recovery (EOR) by Water Flooding: A Case Study of Reservoir OD-48 in the Niger Delta
Queendarlyn A. Nwabueze, Joshua O. Ighalo, pp. 103-113

Mathematical Model of Benzene Alkylation in Linear Alkylbenzenes Manufacturing Technology
Irena O. Dolganova, Igor M. Dolganov, Emilia D. Ivanchina, pp. 98-102

Mathematical Modeling of the Gasoline Manufacturing
Igor M. Dolganov, Vjacheslav A. Chuzlov, Anton Y. Tyumentsev, Irena O. Dolganova, pp. 92-97

Developing of Computer Simulator of H2SO4-Catalyzed Benzene Alkylation with Alkenes
Elena N. Ivashkina, Emilia D. Ivanchina, Irena O. Dolganova, Igor M. Dolganov, Rustam A. Khakimov, Vjacheslav A. Chuzlov, Alexander V. Bekker, pp. 84-91

Structural, Stratigraphic and Combination Traps on Outcropping Lithostratigraphic Units of the Anambra Basin, Southeast Nigeria
Chidozie Izuchukwu Princeton Dim, Ikenna Anthony Okonkwo, Okwudiri Aloysius Anyiam, Chukwudike Gabriel Okeugo, Chioma Oluchukwu Maduewesi, Kachikwulu Kingsley Okeke, and Ijeoma Maryanna Umeadi, pp. 71-83

Characterization of Peat for Identifying the Effectiveness as Energy Source by Proximate Analysis
Hossain Al Tanjil, Sigma Akter, pp. 63-70

Correlation for Predicting Wax Deposition
Promise Ebidiseghabofa Ketebu, Joseph Atubokiki Ajienka, Joel Ogbonna, Sunday Sunday Ikiensikimama, pp. 50-62

Investigation of the Effect of Severity Mode of Operation in the H-Oil Vacuum Residue Hydrocracking on Sediment Formation During Processing Different Feeds
Dicho Stratiev, Ivelina Shishkova, Ekaterina Nikolaychuk, Ivan Ilchev, Dobromir Yordanov, pp. 50-62

An Analytical Model for Characterising Dynamic Filtration of Drilling Fluid in Vertical Well
Oluwatoyin O. Akinsete, Chinelo V. Nwangwu, and Sunday O. Isehunwa, pp. 41-49

Optimal Design of the Film Sulfonation Reactor in Linear AlkylBenzene Sulfonic Acid Manufacturing Technology
Irena O. Dolganova, Igor M. Dolganov, Maria A. Pasyukova, Anastasia A. Solopova, Ajur A. Bunaev, Emilia D. Ivanchina, pp. 35-40

A Comparative Analysis of the Well Performance of Vertical, Horizontal and Multilateral Wells
Ameena A. Gaji, Petrus Nzerem, Oghenerume Ogolo, Ikechukwu Okafor, Ternenge Joseph Chior, pp. 27-34

A Method of Polyethylene Terephthalate Depolymerization by Biodiesel Waste
Georgy Dzhabarov, Valentin Sapunov, Roman Kozlovskiy, Elena Makarova, Phan Dinh Kha, Mikhail Voronov, Violetta Shadrina, Tran Diem Nhi, Tatyana Kurneshova, pp. 19-26

Comparative study of polymethyl acrylate, its hydrazide derivative with commercial surfactants for flow improvements in waxy crude oil
S. Hesham, S.Y. Noha, N. Ehssan, pp. 11-18

Evaluation of the Potential of Calcium Hydroxide Synthesized from Eggshells as a Drilling Fluid Additive
Abdullahi Suleiman Bah Gimba, Shalom Onome Amakhabi Oghenerume Ogolo, Oluwaseun Alonge, Petrus Nzerem, Ikechukwu Okafor, David Afolayan, pp. 1-10

An Assessment of the Level of Safety Awareness among the LPG Consumers in Dhaka City, Bangladesh
Md. Sumon Chowdhury, Farjana Junaky, Md. Al Amin, Simanto Kumar Pal, Md. Rokonuzzaman, Dr Mohammed Mahbubur Rahman, pp. 623-635

Gaseous Emission from the Combustion of AGO from the KRPC in Nigeria
Adedayo Oluseun Osunnusi, Michael Abidemi Oke, Jacob Ademola Sonibare, pp. 617-622

Total Organic Carbon (TOC) Distribution of the Jurassic – Cretaceous Continental Deposits in Central Pahang, Malaysia
Azyan Syahira Azmi, Mohd Suhaili Ismail, Jasmi Ab Tali, pp. 611-616

Seismic Refraction and Downhole Surveys for Delineation of Geomorphic Features in Parts of the Eastern Niger Delta, Nigeria
F. C. Eze, C .Z. Akaolisa, A. I. Opara, A. I. Selemo, T. T. Emberga, and V. E. Nwofor, pp. 595-610

Impact of Hydraulic Fracturing on Productivity of Gas Condensate Wells
Ahmed Elgibaly, Mahmoud Tantawy and Abdelrahman Atef, pp. 587-594

Maximizing Production Through Evaluation of New Prospects in the Producing “Tuba Field”, Onshore Niger Delta
Okwudiri A. Anyiam, Maureen C. Utoh, Ogechukwu A. Moghalu and Byami A. Jolly, pp. 577-586

Adhesion Properties of Modified Bitumen
A. Grigorov, O. Mardupenko, I. Sinkevich, A. Tulskaya, pp. 572-576

Mitigate Formation Damage due to Fines Migration through Experimental Work on Abu Rawash Sandstone using Different Nanofluids
Mohamed Eleraki, Ahmed Noah, El-Abbas Moustafa, Mohamed Mansour, pp. 557-571

Studying of the Processing of Fluid Catalytic Cracking Slurry Oil in the H-Oil Ebullated Bed Vacuum Residue Hydrocracking and Its Effect on the H-Oil Vacuum Gas Oil Quality and Fluid Catalytic Cracking Performance
Dicho Stratiev, Ivelina Shishkova, Rosen Dinkov, Dobromir Yordanov, pp. 542-556

Litho-Fluid Facies Modeling by Using Logistic Regression
Mohammed F. Gouda, Ahmed M. A. Salim, pp. 525-541

A New Device for Energy Recovery from Carbon-Containing Waste and Plant Biomass
Peter A. Savinykh, Fedor A. Kipriyanov, Andrey V. Palitsyn, Alexey S. Zubakin, Alexander N. Korotkov, pp. 516-524

The Impact of Carbon Dioxide and Promotor Concentrations on Mass Transfer Characteristics in a Bubble Column Reactor
Ghassan H. Abdullah, pp. 503-515

Effect of Concentration, Circulation Rate, Stages, Pressure and Temperature of Pure Glycols on Natural Gas Dehydration Performance and Sales Gas Characteristics
Nilay Kumar Sarker, pp.477-502

Hazards Identification and Quality Control for LNG Plant
Mohamed Halafawi, Daniela Popovici, Mirna Charif, Lazăr Avram, pp. 453-476

Mathematical Modeling of Heat Transfer Processes in a Layer of Moving Coked Particles
Mikhail Zhumagulov, Madina Yerkalina, Samal Sadykova, pp. 442-452

A New Approach to Wellbore Stability Models Using Diagnostic Iteractive Design: Case Study - Niger Delta
Kevin C. Igwilo, Emmanuel E. Okoro, Princewell N. Ohia, Peace Nwanro, Nkemakolam C. Izuwa, pp. 429-441

Chemical modification of road oil bitumens by formaldehyde
Volodymyr Gunka, Yuriy Demchuk, Iurii Sidun, Victoria Kochubei, Maria Shved, Viktoria Romanchuk, Bohdan Korchak, pp. 420-429

Weathered Layer Characterization of Ohaji-Egbema and Environs, South Eastern Nigeria, Using Up hole Refraction Surveys
O. Ajayi, A. I. Opara, C. A. Ahiarakwem, O. C. Okeke, V. I. Fagorite, pp. 406-419

Casing Wear Prediction in Horizontal Wells
Dan Rădăcină, Mohamed Halafawi, Lazar Avram, pp. 395-405

Identification of Regularities of Vacuum Gas Oil Hydrocracking Process
Nataliya S. Belinskaya, Ekaterina N. Mauzhigunova, Daria A. Afanaseva, Evgeniy K. Vymyatnin, 390-395

Vacuum Distillate Catalytic Cracking Technology Modelling: Feedstock and Products Composition and Properties Investigation
Galina Y. Nazarova, Elena N. Ivashkina, Alexandra A. Oreshina, Eugene K. Vymyatnin, Gaini Zh. Seytenova, Galiya R. Burumbaeva, pp. 380-389

Newly Designed Soft Drilling Simulator A computer based drilling simulator
Adel M. Salem, Mahmoud Boraey, M. S. Farahat, pp. 370-379

Study on Emulsification Tendency of Hydrate and Corrosion Inhibitors on Water-Hydrocarbon Mixture in Gas Pipelines
Mahboobeh Mohammad-Taheri, Zahra Taheri Rizi, Maryam Hosseini Aliabadi, Hadi Shakoori, pp. 365-370

A Modified Method for Predicting Relative Permeability
Mohamed Ameen, Mahmoud Tantawy and Ahmed Gawish, pp. 355-364

Geothermal Gradients and Heat Flow Variations in the Shallow Offshore, Offshore Depobelt of the Eastern Niger Delta, Nigeria
Nchinda Emaculet Machinda , Chukwuemeka Frank Raluchukwu Odumodu, Bruno Ndicho
Nfor, and Michael Emenike Egbunike, pp. 347-354

Obtaining of Resins Based on Model Mixtures with Indene, Coumarone and Styrene and their Usage as Bitumen Modifiers
Serhiy Pyshyev, Yurii Prysiazhnyi, Iurii Sidun,, Maria Shved, Guri Isaiah Borbeyiyong, Diana Korsh, pp. 341-346

Evaluation of Geomechanical Properties for Tight Reservoir Using Uniaxial Compressive Test, Ultrasonic Test, and Well Logs Data
Nagham Jasim, Sameera M. Hamd-Allah, Hazim Abass, pp. 329-340

Optimal Recovery of Heavy-Oil Using Numerical Simulation of Polymer Flooding
Mujeeb B. Adetayo, Michael O. Onyekonwu, Oghenerume Ogolo, pp. 316-328

Influence of the Properties Raw Coal Materials and Coking Technology on the Granulometric Composition of Coke
Message 2. Granulometric Composition of the Coke as a Function of the Coal Batch Properties
V. P. Lyalyuk, E. O. Shmeltser, D. A. Kassim, I. A. Lyakhova, pp. 309-315

Optimization and Modeling of the Rate of Penetration in an Extended Reach Drilling Process
Igwilo K. Chinwuba, Odo J. Emeka, Uwaezuoke Nnaemeka, Ihedilionye G. Soromtochukwu, Nwaneri P. Chibuzor, pp. 299-308

The Influence of Surfactant Concentration and Surfactant Type on the Interfacial Tension of Heavy Crude Oil/Brine/Surfactant System
Damilola V. Abraham, Oyinkepreye D. Orodu, Vincent E. Efeovbokhan, Oluwasanmi Olabode, Temiloluwa I. Ojo, pp. 292-298

Risk Assessment and Safety Analysis in Natural Gas Transmission and Distribution System, Bangladesh
Md. Khalid Hasan, M. Farhad Howladar, Jashim Uddin Ahmed, pp. 928-937

Characterisation of the Fuel Properties and Energy Recovery Potential of Obomkpa Coal from Delta State in Nigeria
Bemgba B. Nyakuma, pp. 1131-1137

Gasification of Coke-Plant Wastes
Daria Bilets, Denis Miroshnichenko, Pavlo Karnozhitskiy, pp. 1121-1130

Coal Mining Waste as Raw Material for the Construction Industry

Elina Khobotova, Maryna Ihnatenko, Inna Hraivoronska, Iuliia Kaliuzhna, pp. 1112-1120

Economic Analysis of Distributed Control System (DCS) and Conventional System Flowstations
Austine B. Tukorogha, Uche Osokogwu, Goodness O. Ani, pp. 1005-1111

Improving Productivity of Low-Pressure Reservoirs Using Cost Effective N₂-Energized Fracturing Fluids
Ahmed A. Elgibaly, Adel M. Salem, Tarek A. Ali, pp. 994-1004

Functional Analysis of Performance of Artificial Neural Networks (MPL) and (RBF) in predicting seismicity of tubes related to offshore drilling in one of Iran's oilfields
Sajjad Mozaffari, Armin Hosseinian, Arash Pourabdol Shahrekordi, Seyed Jamal Sheikhzakariaee, Mohammad Javad Mansouri, pp. 975-993

Use of Horizontal Wells as an Effective Production Strategy for Thin Oil Rim
Obinna Nwakama, Naomi A. Ogolo and Mike O. Onyekonwu, pp. 966-974

Enhancement and Optimization of an Egyptian Natural Gas Processing Plant
Abeer M. Shoaib, Ahmed A. Bhran, pp. 957-965

Studying the Regularities of Atmospheric Oil Distillates Catalytic Dewaxing Process Using the Method of Mathematical Modelling
Nataliya S. Belinskaya, Ekaterina N. Mauzhigunova, Daria A. Afanasyeva, Violetta V. Bykova, Alexey S. Lutsenko, pp. 951-956

Kinetic Studies of Butene Oligomerization over HZSM-5 Zeolites with Different Acidity
Laleh Shirazi, pp. 945-950

Synthesis, Characterization and Evaluation of Some Green Mannich Nano-Dispersant from Egg-Albumin

Rabab M. Nasser, Asmaa G. Komier, Bushra Y. Madkhali, pp. 938-946

On the Importance of Mesophase State on Coke Structure
Alexandra Boytsova, Sergey Strokin, Jorge Ancheyta, pp. 917-927

Boosting the Research Octane Number (RON) of an Industrial Scale Light Naphtha Isomerization Unit by Using Adaptive Neuro-Fuzzy Inference System (ANFIS)
Sepehr Sadighi, Seyed Reza Seif Mohaddecy, Mahdi Talebbeigi, pp. 907-916

Features extraction from carbonate modern platforms satellite imagery using Computer Vision
Grisel Jiménez Soto, Mirza Arshad Berg, Michael C. Poppelreiter, Khaidir Rahmatsyah, pp. 899-906

The Effect of Polyvinyl Chloride on the Properties of Coal Tar Pitch
Iryna Krutko, Viacheslav Kaulin, Kateryna Yavir , Iryna Danylo, pp. 888-898

Estimates of Geothermal Gradient of Part of the Mid-Niger Basin, Nigeria From Spectral Inversion of High-Resolution Aeromagnetic Data: Implications for Hydrocarbon and Geothermal Energy Prospectivity
A. I. Opara, V. U. Nwofor, A. C. Ekwe, C. N. Okereke, H. N. Echetama, and J. O. Ibezim, pp. 876-887

Complex BHA Mechanics and Performance Analysis for Horizontal Wells
Mohamed Halafawi, Lazăr Avram, pp. 858-875

Polycyclic Aromatic Hydrocarbons (PAHs) and Carcinogenic Polycyclic Aromatic Hydrocarbons (cPAHs); Implications for Groundwater and Stream qualities around Mamu Coal Exposure in Okaba-Odagbo Mining District, Ankpa, North-Central Nigeria
O. C. Adeigbe, and A. A. Rahaman, pp. 845-857

Shale Gas in Western Ukraine: Perspectives, Resources, Environmental and Technogenic Risk of Production
Yaroslav Lazaruk, Vasyl Karabyn, pp. 836-844

Biodegradation Assessment of Bacillus subtilis Isolated from Locust Beans on Crude Oil
Abayomi O. Olatunde, Olumide. I. Ogunyemi, Olaosebikan A. Olafadehan, Mohammed A. Usman, Moradeyo.O. Odunlami, Semiu A. Kareem, pp. 830-835

Thermal Treatment of Charcoal for Synthesis of High-Purity Carbon Materials
Serhii Fedorov, Lina Kieush, Andrii Koveria, Sergii Boichenko, Artem Sybir, Michailo Hubynskyi, Svitlana Foris, pp. 823-829

Selection of a Dispersion Medium for Recycling Plastic Greases According to Fire and Explosion Indicators
Andrey Grigorov, Alexey Sytnik, Natalia Ponomarenko, Gelena Neustroieva, Mikhail Nahliuk, pp. 818-822

Predicting the Performance of Artificial Barrier Fracturing with the Aid of Neural Network Modeling
Ahmed A. Elgibaly, Mohsen G. K. El-Nouby, Mahmoud A. A. El-Fattah, pp. 804-817

Esterification of Lauric Acid with Ethanol Using Zirconium Oxide as Heterogeneous Catalyst
Ruqaya Q. Sabah and Marwa F. Abdul Jabbar, pp. 799-803

Directions of transformation of the stable gas condensate hydrocarbons on a zeolite catalyst under zeoforming conditions
Ilya A. Bogdanov, Andrey A. Altynov, Maria V. Kirgina, Kanan E.O. Mardanov, pp. 792-798

Fluid Flow through Shale Gas Reservoirs: Simplified Conceptual and Mathematical Models
Suresh Kumar Govindarajan, Abhishek Kumar and Avanish Mishra, pp. 776-791

Application of Ion Association Modeling in Prediction of Oilfield Scaling Tendency during Oil Recovery Process by Water Flooding
Jaber Azizi, Seyed Reza Shadizadeh, Abbas Khaksar Manshad, Naghi Jadidi, Amir H Mohammadi, pp. 765-775

Preparation of Hydrogels Based Methacrylamid by Thermal Method for Water Adsorption and Changing Rheological Properties of Bentonite-Base Drilling Mud
Shokoufeh Abbasi, Alireza Fazlali, Maryam Adimi, Amir H Mohammadi, pp. 754-764

Implementation Drilling with Casing ROP Optimization with Multi Regression Mathematical Model in KHALDA co. Fields in the Western Desert, Egypt
Mostafa Ibrahim, Taher El Fakharany, Mohamed S. Farhatand Mohamed Maher, pp. 743-753

Influence of Using Different Mixtures of Amines on the Performance of Natural Gas Sweetening Process at Iraqi North Gas Company
Ali Nasir Khalaf, Saib. A. Yousif, pp. 735-742

Performance Evaluation of Artificial Lift Systems for Heavy oil Wells in the Egyptian Eastern Desert
Mahmoud A. El Gharbawi, Ahmed A. Elgibaly, Adel M. Salem, Mohamed Abbas, pp. 720-734

Time lapse (4D) Seismic for Reservoir Fluid Saturation and Monitoring: Application in Malaysian Basin
Shiba Rezaei, Amir Abbas Babasafari, Yasir Bashir, Chico Sambo, Deva Ghosh, Ahmed Mohamed Ahmed Salim, pp. 712-719

Investigating the Rheological Properties of Bitumen Clay Emulsion with Different Bentonite Emulsifiers for Pavement Application
Mostafa Kalantari Sarcheshmah, Mohammad Mehdi Khabiri, Hamed Khani Sanij, pp. 702-711

A novel approach of fines migration control using nanoparticle through zeta potential measurements
Mohamed Mansour, El-Abbas Moustafa, Mohamed Eleraki, Ahmed Noah, pp. 691-701

Predictive Correlations and Optimization of Atmospheric Long Residue Hydrotreating Process
Magdy S. Sherbi, Rehab M. El-Maghraby, Abeer M. Shoaib, Ahmed A. Bhran, pp. 678-690

Production Optimization of Water Coning Wells Using Numerical Simulation and Neural Network Modeling
Islam Zewain, Ahmed Elgibaly, pp. 664-677

Influence of the Properties Raw Coal Materials and Coking Technology on the Granulometric Composition of Coke

Message 3. Method of Machining Blast Furnace Coke
V. P. Lyalyuk, E. O. Shmeltser, D. A. Kassim, I. A. Lyakhova, pp. 659-663

Reservoir Simulation Model Sensitivity and Uncertainty Assessment Through Assisted History Matching (AHM)
Kamal S. El-Shayal, Said K. Elsayed, Ahmed A. Gawish and Adel M. Salem, 651-658

Review on the Application of Porous Minerals in the Removal of Volatile Organic Compounds: as Adsorbent or Catalyst Carrier
Xinpeng Liu, Baohua Wang, pp. 636-650

The pyrolytic interaction of coal tar pitches with various coals
Fedor F. Cheshko, Valeriia V. Karchakova, Valentin V. Koval, pp. 1601-1605

Estimation of the Efficiency of Use of Sizing Out of Small Classes before Final Grinding of Coals
Serhii Fatenko, Denis Miroshnichenko, pp. 1595-1600

Evaluation of the Impact of pH on the Rheological Property of Drilling Fluid Formulated with Mucuna flagellipe and Brachystegia eurycoma
Anthony Kerunwa, pp. 1586-1594

Reducing Thin Bed Reservoir Interpretation Uncertainty Using Comprehensive AVO Classification
Abd Alsalam Almasgari, Mohamed M. Elsaadany, Abdul Halim Abdul Latiff, Nu-mair  Ahmed Siddiqui, Eko Widi Purnomo, Ismail Alwali Babikir, Teslim Adeleke, and Qazi Sohail Imran, pp. 1577-1585

Carbon Dioxide Conversion to Valuable Products over Iron Catalyst: Temperature Effect
Isa Shahroudbari, Yaghoub Sarrafi, Rahman Hoseinzadeh, Yahya Zaman, pp. 1572-1576

Possibility Improvement Technology of Modification Road Bitumen by the Green Epoxy Rapeseed Oil on the Basis of Renewable Raw Material
Yurii Hrynchuk, Iurii Sidun, Volodymyr Gunka, Volodymyr Reutskyy, Iryna Koval, Pavlo Matcipura, Mykola Mosiuk, pp. 1566-1571

Complexities of Natural Gas Hydrates as an Energy Resource and its relation with Climate

Suresh Kumar Govindarajan, pp. 1557-1565

Hydrocarbon Exploration of ‘JM’ Field’ Offshore Niger Delta
O. S. Hammed, T. S. Fagbemigun, A. B. Arogundade, J. O. Amosun, M. O. Awoyemi, O. T. Olurin, A. Owasanoye, J. O. Adebayo, pp. 1546-1556

Natural Convective Non-Newtonian Casson Fluid Flow in a Porous Medium with Slip and Temperature Jump Boundary Conditions
Adebowale Martins Obalalu, Olusegun Adebayo Ajala, Adeshina Taofeeq Adeosun, Fatai Adisa Wahaab, Oluwaseyi Aliu, and Lawal Lanre Adebayo, pp. 1533-1545

A Comparative Model to Differentiate Between the Production from Vertical and Horizontal Wells in Bilciuresti Gas Field
Robert-Valentin Dinu, Mohamed Halafawi, Dinu Florinel, Lazăr Avram, pp. 1523-1532

Optimal Coal Preparation Scheme in the Conditions of the Azovstal Metallurgical Plant
Serhii Fatenko, Denis Miroshnichenko, pp. 1517-1522

Airborne and Satellite Geophysical Data Interpretation of the Gubio Area in the Bornu Basin, Northeastern Nigeria: Implication for Hydrocarbon Prospectivity
Daniel N. Obiora, Bernadette C. Dimgba, Ifeanyi. A. Oha, Johnson C. Ibuot, pp. 1504-1516

Prediction of Average Porosity of Sand Gas Reservoir in Bangladesh
Md. Sumon Chowdhury, Md. Shaheen Shah, pp. 1497-1503

Investigation of Fluid Catalytic Cracking Catalyst Performance in a Laboratory ACE FCC Unit During Processing Gas Oils Containing H-Oil Gas Oils with a Variable Quality and a Variable Quantity
D. Stratiev, Ivelina Shishkova, Ivan Petrov, Dobromir Yordanov, Vesislava Toteva, pp. 1485-1496

Comparative Study of Drilling Fluid Impact on Well Controls Methods For Deviated Wells, Gulf Of Suez, Egypt
Ahmed Mohsen, Mohamed Shehata Farahat, Shohdi El-Maghrbi Shalaby, pp. 1474-1484

An Approach to Curbing Wellbore Instability in Shales through Nanoparticles-Augmented Water-Based Drilling Muds
Anthony Kerunwa and Stanley Toochukwu Ekwueme, pp. 1465-1473

Evaluation of the Development Strategies for a Greenfield Using Integrated Production Modeling
Onyebuchi Nwanwe, Nkemakolam Izuwa, Chibuzo Nwanwe, Ndubuisi Okereke, Nnamdi Nwajiuba, Ngozi Nwogu, pp. 1449-1464

Conceptual Modelling of Low Salinity Water Flooding in a Fractured Reservoir
Suresh Kumar Govindarajan, Abhishek Kumar, Avanish Mishra, T. N. Venkata Pavan, pp. 1435-1448

Enhancement of Water-Based Mud Rheology and Lubricity Using Silica Nanoparticles
Abdulrahman Mohamed, Abdel-Sattar A. Dahab, Eissa Shokir, pp. 1427-1434

Alternating Copolymerized Derivative as a Pour Point Depressant for Gas Oil
Taisir Taha Ali Khidr, pp. 1420-1426

Seismic Interpretation and Petrophysical Analysis of a Cretaceous Reservoir in Lower Indus Basin, Pakistan
Mohib Ullah, Shazia Asim, Yasir Bashir, pp. 1405-1419

Modeling of Zeoforming Process Variables Using GMDH Neural Network on Pilot Scale Experiments
Saeed Soltanali, Reza Seif Mohaddecy, Maryam Mashayekhi, Mehdi Rashidzadeh, pp. 1397-1404

Developing an Expert System for Identifying Optimal Pumping Lift Based on Technical, Financial and Components Levels
Mahmoud A. Morsy, Abdel-Alim H. El-Sayed, pp. 1389-1396

Characterization of Bara Formation coals in Lakhra region, Lower Indus Basin Pakistan: Implication of hydrocarbon generation potential and depositional environment
Zain Gul, Wan Hasiah Abdullah, Yousif M. Makeen Ahmed, Muhammad Jamil, Nisar Ahmed, pp. 1369-1388

Analysis of Factor Effects and Interactions in A Conventional Drilling Operation by Response Surface Methodology and Historical Data Design
Wilson Fidelis Ekpotu, Joshua O. Ighalo, King-akanimo Bassey Nkundu, Precious Ogwo Onu, Adewale George Adeniyi, pp. 1356-1368

A comparative Approach to Differentiate Between the Amount of Rock Cuttings Generated in ERD and Conventional Drilling
Sameer Younus, Hussein El Gburi, Mohamed Halafawi, Lazăr Avram, pp. 1346-1355

Fuel Characterisation of the Physicochemical, Thermal and Kinetic Properties of Corn Cob Biomass Wastes for Potential Energy Recovery
Victor O. Otitolaiye, Yakubu A. Dodo, Zainab T. Jagun, Faizah M. Bashir, Lawrence P. Moveh, Samuel-Soma M. Ajibade, Samuel Moveh, Bemgba B. Nyakuma, pp. 1338-1345

The Coking Properties Quality Prediction of Coal from Steenkool Formation in Bintuni Basin, West Papua, Indonesia
Ahmad Helman Hamdani, Johanes Hutabarat, pp. 1329-1337

Palynostratigraphy and Lithostratigraphy of Ha-001 Well, Shallow Offshore, Western Niger Delta, Nigeria
Olubusayo A. Olatunji, Edward A. Okosun, Usman S. Onoduku, Yahya B. Alkali, pp. 1317-1328

Grid Adaptation of Multiphase Fluid Flow Solver in Porous Medium by OpenFOAM
L. Sugumar, Abhishek Kumar, and Suresh Kumar Govindarajan, pp.1301-1316

Quantitative Microfacies Study of Miocene Carbonate, Central Luconia, Sarawak
Shamsimah Rahman, Haylay Tsegab, pp. 1289-1300

Estimation of Original Oil in Place Using Pickett’s and Buckle’s Plots, Offshore Niger Delta, Nigeria
Agbasi E. Okechukwu, Etuk E. Sunday, Abdulaziz M. Abdulaziz, Joseph I. Namdie, Robert W. Ubong, pp. 1279-1288

Investigating the Impact of PVT Analysis Errors on Material Balance Calculations for Oil Reservoirs
A. Ragab and E. M. Mansour, pp. 1272-1278

Optimum Conditions for the Catalytic Cracking of Palm Oil from Empty Fruit Bunch over Dolomite in a Continuous Reactor
Phasatorn Khunoad, Phorndranrat Suchamalawong, Kittiphop Promdee, and Tharapong Vitidsant, pp. 1256-1271

Intellectual Training-System of the Process of Catalytic Cracking of Heavy Oils
Galina Y. Nazarova, Vyacheslav A. Chuzlov, Emiliya D. Ivanchina, Elena N. Ivashkina, Uljana N. Kopycheva, Irena O. Dolganova, pp. 1250-1255

Performance Characteristics of Parkia biglobosa as Fluid Loss Control Agent in Aqueous Mud System
Nnaemeka Uwaezuoke, Ibuchukwu S. Onwukwe, Chinwuba K. Igwilo, Ugochukwu I. Duru, B. Obah, pp. 1242-1249

Utilisation of Sweet Potato (Ipomoe batatas) and Rice Husk (Oryza sativa) Starch Blend as a Secondary Viscosifier and Fluid Loss Control Agent in Water-based Drilling Mud
Queendarlyn A. Nwabueze, Joshua O. Ighalo, pp. 1230-1241

Vaclav Smil’s Perspective on Fossil Fuels and Renewable Energy: A Review
Anil Kumar Vinayak, Anand V. P. Gurumoorthy, 1231-1239

Combustion Characteristics and Decomposition Kinetics of Melon Seed Husks Based on the Distributed Activated Energy Model
Bemgba B. Nyakuma, Olagoke Oladokun, Tertsegha J-P. Ivase, Moses I. Ayoosu, Jamila Baba Ali, Samuel Moveh, Yakudu A. Dodo, pp. 1225-1230

Multiple Point Statistics Carbonate Facies Modelling Workflow Using Core Data and Spectral Decomposition Attributes: A Case Study from TX Field in Central Luconia Province, Malaysia
Grisel Jiménez Soto, Mirza Arshad Beg, Michael C. Pöppelreiter, Khaidir Rahmatsyah, pp. 1209-1224

Global Overview of Fractured Basement Plays
Jenny Caddick, Theodhora Piperi, Cristina Martinez Tomé, Cyril Ruchonnet, Norishah Hashim, Matthew Turner, William Plampton, Antonio Jr. Dimabuyu, Betty Xu Wei, Anthony Jaep, Tristan Reilly, Marie McKechnie, Philippe Renevey and Michael C. Pöppelreiter, pp. 1180-1208

Investigating the Influence of Some Well and Fluid Parameters on the Accumulation of Liquids in Gas Wells

Amieibibama Joseph, Ngowari O. Ikiriko, pp. 1172-1179

Depth Estimation, Structural Features and Mineralization from High Resolution Aeromagnetic and Satellite Data over Yola Arm of the Upper Benue and Adjoining Basement Regions, Northeastern Nigeria
Bello Rasaq, Hayatudeen Musa, Nsikak Edet Bassey, Kaigama Usma, 1163-1171

Physicochemical Fuel Properties and Carbonization Kinetics of Duduguru Coal
Bemgba B. Nyakuma, Aliyu Jauro, Segun A. Akinyemi, Mohammed B. Nasirudeen, Olagoke Oladokun, Aliyu A. Bello, Tertsegha J-P. Ivase, Tuan Amran T. Abdullah, pp. 1153-1162

Anti-collision Planning Optimization in Directional Wells
Abdulrahman Mohamed, pp. 1144-1152

An Experimental Study of Effects of Egg Shell and Snail Shell Powder on Rheological and Filtration Properties of Potassium Chloride Polymer Drilling Fluids
Olugbenga Olamigoke, Toritseju T. Aghante, Felix Iyalla, pp. 1138-1143