Volume 58, 2016

Mathematical modelling and optimization of catalytic dewaxing of diesel oil cuts and atmospheric gas oil
Nataliya S. Belinskaya, pp. 126-134

INVESTIGATION ON PRECISION OF DETERMINATION OF SARA ANALYSIS OF VACUUM RESIDUAL OILS FROM DIFFERENT ORIGIN
Dicho Stratiev, Ivelina Shishkova, Radoslava Nikolova, Tania Tsaneva, Magdalena Mitkova, Dobromir Yordanov, pp. 109-119

ADDRESSING POLLUTION FROM DEVELOPED COMPOSITE SOLID FUELS (CHARCOAL) FOR HOUSEHOLD AND INDUSTRIAL PURPOSE
Mamudu Abbas, Mamudu Yahaya, Olafuyi Olalekan , pp. 102-108

CHARACTERISATION OF MALAYSIAN WAXY CRUDE OILS
N. Sharma, F.F. Yasin, S. Shahruddin, M.A. Mohd Fadzil, Y. Rajantereh, A.V.M. Chandramalar, N. Samsodin, pp. 95-101

CATALYTIC CRACKING OF USED LUBRICATING OIL OVER FE/AL2O3 AND FE/SIO2-AL2O3
Waraporn Makvisai, Kittiphop Promdee, Harakhun Tanatavikorn, Tharapong Vitidsant, pp. 83-94

СOMPUTER SIMULATOR FOR STUDENT TRAINING TO EFFECTIVE EXPLOITATION THE CATALYTIC CRACKING UNIT
Galina Y. Nazarova, Galiya R. Burumbaeva, Tatyana A. Shafran, Alexander Y. Svarovskii, pp.76-82

METHANOL CATALYTIC CONVERSION OVER SAPO-34 WITH DIFFERENT TYPES OF TEMPLATE
Laleh Shirazi, pp. 66-75

PERFORMANCE ENHANCEMENT OF PT-RE/ AL2O3 NAPHTHA REFORMING NANOCATALYSTS USING MICROEMULSION TECHNIQUE
Mahdieh Razi Asrami, Behnam Nejati, Ahmad Tavasoli, Ali Karimi, pp. 56-65

DEVELOPMENT OF COMPUTER MODELLING SYSTEM AS A TOOL FOR LIGHT NAPHTHA ISOMERIZATION IMPROVMENT
Vjacheslav A. Chuzlov, Konstantin V. Molotov, pp. 47-55

PREDICTION OF CO2 EQUILIBRIUM MOISTURE CONTENT USING LEAST SQUARES SUPPORT VECTOR MACHINES ALGORITHM
Mohammad M. Ghiasi, Jafar Abdi, Meysam Bahadori, Moonyong Lee, Alireza Bahadori, pp. 27-46

THE EFFECT OF ABRASIVE MINERALS ON THE MECHANISM OF ROAD STONES POLISHING
Mohammad Reza Soleymani Kermani, Mohamad Hosein Dehnad, pp. 17-26

THE EFFECT OF ABRASIVE MINERALS ON THE MECHANISM OF ROAD STONES POLISHING
Nkemakolam Izuwa, Basil C Ogbunude, pp. 1-16

Chemical treatment of γ-al2o3 and its influence on the activity, selectivity and stability of cobalt-based catalysts for fischer–tropsch synthesis
Ali Karimi, pp. 270-280

Increasing the efficiency of a temperature swing adsorption (tsa) natural gas dehydration plant
Sepehr Sadighi, Mahdi Asgari, Hossein Mohammadi, Farshid Noorbakhsh, pp. 260-269

Composite solid fuel development from waste wood at maximum emission reduction for use by low-income earners in agbede, nigeria
Mamudu Abbas, Mamudu Yahaya and Olafuyi Olalekan, pp. 253-259

Formation of highly viscous component in linear alkylbenzenes sulphonation reactor and its effect on product quality
Irena Dolganova, Igor Dolganov and Kseniya Vasyuchka, pp. 247-252

An intelligent model for estimating bubble point oil formation volume factor
Mohamad Heidarian, Masoud Karimnezhad, Mahin Schaffie, Mohammad Ranjbar, pp. 240-246

Effects of mixing conditions on properties of asphalt modified by crumb rubber
Lucia Hrušková, Elena Hájeková, Pavol Daučík, pp. 232-239

Consequence analysis for probable accidents of odorizer tanks installed in gas pressure reduction stations
Mohammad Sadegh Yousefzadegan, Esmaeil Ghasemi Kafrudi, Amir Masoud Masoudi, Parinaz Alimardani, Saghi Salehi, Alireza Saatchi, Yaser Kazemi, Seyed Iman Pishbin, pp. 223-231

Assessment of natural depletion and water injection in the development of oil reservoirs
Loveday C. Igbokwe, Chukwuemeka M. Muonagor and Angela N. Nwachukwu, pp. 209-222

Investigation on feasibility to simulate crude oil true boiling point distillation by application of astm d-7169 simulated distillation and combination of astm d-86 and astm d-1160 physical distillation methods
Ekaterina Nikolaychuk, Dicho Stratiev, Ivelina Shishkova, Anife Veli, Magdalena Mitkova, Dobromir Yordanov, pp. 194-208

Reservoir characterisation and structural interpretation for prospect evaluation- a case study
Anthony Aduojo Ameloko, J. Rotimi Oluwatosin, Blessing Alfa, Ifeanyi Obihan, pp.185-193

Petrographic and microtextural analyses of miocene sandstones of onshore west baram delta province, sarawak basin: implications for porosity and reservoir rock quality
Abdullah Musa Ali, Eswaran Padmanabhan and Hassan Baioumy, pp. 162-184

Increase of efficiency isopropylbenzene manufacturing with use of integrated mathematical models
Alyona A. Chudinova, Nadezhda I. Buchatskaya, Vladimir V. Podgorniy, Aleksey A. Gavrikov , Elena N. Ivashkina, Irena O. Dolganova, pp. 155-160

Evaluation of thermal maturation indices in sedimentary basins: implications to hydrocarbon potentials in bornu basin nigeria
Cyril N. Nwankwo and Leonard I. Nwosu, pp. 143-154

Stability of alkylation and sulphonation units joint work in alkylbenzene sulphuric acid manufacturing
Irena O. Dolganova, Elena N. Ivashkina, Emilia D. Ivanchina, Kseniya A. Vasyuchka, pp. 135-142

Environmental impact assessment and baseline studies of oluyole industrial estate effluents, ibadan southwestern nigeria
O. C. Adeigbe, pp. 390-406

Naphtha catalytic upgrading for production of environmentally- friendly gasoline
Saba A. Gheni, Aysar T. Jarullah, Amer D.Z.Albdiri, Ghassan H. Abdul Razak, pp. 382-389

Design of experiments on sodic activation of bentonite for using as water-based drilling fluids
Benamar Makhoukhi, pp. 368-381

Modeling the impacts of petrophysical and textural parameters on dissolution of carbonate rocks at 25°c, 50°c, and 75°c
Spariharijaona Andriamihaja, E. Padmanabhan, Joel Ben-Awuah and Rajalingam Sokkalingam, pp. 359-367

Evaluation of crumb rubber properties term of use as modifier for asphalt
Lucia Hrušková, András Peller, Pavol Daučík, pp. 349-358

Determination of organic nitrogen and phenolic compounds in sour wasterwater from ebullated bed hydrocracking unit
Antoaneta Pavlova, Dicho Stratiev, Rosen Dinkov, Ilshat Sharafutdinov, Ivelina Shishkova, Petar Chakarov, Magdalena Mitkova, pp. 339-348

Geochemical evaluation of nkporo formation from nzam-1 well, lower benue trough
Mutiu. A. Adeleye, Adetola. J. Abiodun and Liao. Yuhong, pp. 328-338

Parametric study of viscosity of water base drilling fluid; basis experimental data
Saeed Shabani, Farshad Farahbod, pp. 321-327

Modeling and investigation of the operational parameters in the process of mercaptan and water removal from natural gas by adsorption on zeolite 13x
Jafar Sadeghzadeh Ahari, Zahra Shafiee, Khashayar Mohammadbeigy, Saeed Pakseresht, Majid Kakavand , Mehdi Kolivand, pp. 307-320

Estimation of the oil saturation by fuzzy inference system in well#omnx , hassi messaoud oil field (algeria)
Ali Zerrouki Ahmed, Baddari Kamel, pp.299- 306

Numerical stability analysis of drilled wells in maroun oilfield
Mohammadreza Zare-Reisabadi, Mohammad Parvazdavani, Hosein Sharifi, pp. 292-298

A sensitivity study of reservoir and geomechanical parameters on hydraulic fracturing initiation and propagation in tight formations
Mohammad Tabaeh Hayavi, Mohammad Abdideh, pp. 281-291

Estimation of solution gas oil ratio
Ghassan H. Abdul-Majeed, pp. 539-550

Application of attenuated total reflectance-fourier transform infrared spectroscopy (atr-ftir) to evaluate impact of rock heterogeneities on hydrocarbon distribution in deltaic reservoir sandstones
Joel Ben-Awuah and Eswaran Padmanabhan, pp. 522-538

Production of activated carbon from a low grade coal
B. S. Yahaya, J. O.Akinyeye, I. C. Egbuna, pp. 517-521

Characterization of pore systems in carbonate using 3D x –ray computed tomography
Spariharijaona Andriamihaja, E. Padmanabhan and Joel Ben –Awuah, pp. 507-516

Feasibility study of using a three-phase separator for increasing ngl production in an iranian’s dehydration plant
Jafar Shariati, Mahmoud Bahmani, A. Nemati Rouzbahani, pp. 499-506

Mathematical modeling and steady states multiplicity analysis of methyl tert-butyl ether reactive distillation synthesis
Olga E. Mityanina, Marina A. Samborskaya, Ayan N. Sabiev, pp. 490-498

Source - rock potential of the lower cretaceous sediments in sd – 1x well, offshore tano basin, south western ghana
P. Garry, D. Atta-Peters, C. Achaegakwo, pp. 476-489

Investigating the Capability of Artificial Neural Network to Modify and Optimize an Industrial Methanol Production Process
M. A. Khademi, J. Shariati, M. Bahmani, S. Talati, pp. 465-475

Recovering ammonium molybdate catalyst in the homogenous phase to upgrade heavy crude oil
Seyed Kamal Masoudian, Sepehr Sadighi, pp. 461-464

Improvement of methane decomposition over a ni base catalyst: preparation, comparison and performance study
Hiba R. Musa, Saba A. Gheni, Mohammed A. Atiya Al – Saraj, pp. 450-460

Effect of mn promoter on nano-sized iron catalyst for fischer-tropsch synthesis
Yahya Zamani, pp. 444-449

Foraminiferal and calcareous nannofossil biostratigraphy and paleoenvironmental studies of saa -1 and saa-3 wells, offshore niger delta
O. C. Adeigbe and A. M. Adeleye, pp. 430-443

Petrophysical and reservoir characteristics of sedimentary rocks from offshore west baram delta, sarawak basin, Malaysia
Joel Ben-Awuah, Eswaran Padmanabhan, Spariharijaona Andriamihaja, Prince Ofori Amponsah and Yasir Ibrahim, pp. 414-429

Appraisal of the bulk properties of bitumen samples from four deposits in south west, Nigeria
M. C. Onojake and C. O. Ndubuka, pp. 407-413

Oxidative modification of petroleum resins and reception of emulsions with industrial oils
Daria V. Fisenko, Anna A. Manankova, Vladimir G. Bondaletov, Marina Y. Fillipova, Vera A. Yakimova, pp. 590-596

Lactide and lactic acid oligomer solubility in certain solvents
Valentina N. Glotova, Tamara N. Bikmullina, Aleksandr E. Lukianov, Viktor T. Novikov and Yuliya E. Poharukova, pp. 585-589

Modification of aromatic petroleum resin
Vladimir G. Bondaletov, Lyudmila I. Bondaletova, Nguyen Van Thanh, Tatyana A. Prokopyeva, pp.578-584

Study of phenol degradation pathway during electromediated mineralization
Ekaterina V. Zangieva, Margarita K. Zamanova, Olga S. Kukurina, pp. 573-577

Analytical control of lactide synthesis
Daria S. Krutas, Margarita K. Zamanova, Aleksandr E. Lukianov, Aleksey L. Zinovyev, Viktor T. Novikov, Tatyana N. Volgina, pp. 567-572

Synthesis of l-lactide supplemented with stage-wise analytical control
Daria S. Krutas, Jiří Brožek, Václova Benešová, Alex L. Zinovyev, Viktor T. Novikov, pp. 561-566

Friction and wear behavior of polydicyclopentadiene under dry sliding and boundary lubrication
Margarita K. Zamanova, Viorika I. Kucuk, Vladimir G. Bondaletov, Olga S. Korneva, Ivan A. Shulepov, Dmitrii A. Rusakov, pp. 556-560

Modification of natural petroleum adsorbent sphagnum dill
Olga V. Rotar, Victor G. Rotar, Tatyana A. Gess, Alexander A. Iskrizhitsky, Daniel S. Vorobiev, pp. 551-555

Analytical methodology to reconstruct fluid composition for retrograde condensate field with an initial oil rim in the aim of full fluid characterization
Ali A. Ghanem, Ghada S. Alkhaddour, pp. 758-768

The determination of equilibrium ratios of hydrocarbons at reservoir condition
Mojtaba Amiri, Ehsan Kamari, Ali GhareSHeykhloo, pp. 753-757

Eco-friendly bio-based lube oil additives
Rabab M. Nasser, Nehal S. Ahmed, Amal M. Nassar, pp. 687-694

Cobalt loading effects on the performance and stability of graphene nanosheets supported cobalt catalyst in fischer-tropsch synthesis
Fateme Hasanpour, Saba Karimi, Sanaz Anahid, Ahmad Tavasoli, Yahya Zamani, pp. 676-686

Surface characterization of goethite-humate chelations complexated with quartz
Abdullah Musa Ali, Eswaran Padmanabhan and Hassan Baioumy, pp. 668-675

Determining the intrinsic kinetics of fischer–tropsch synthesis over cobalt catalyst supported on functionalized carbon nanotubes
Behnam Hatami, Alireza Asghari, Ahmad Tavasoli, pp. 655-667

Characterization and ash chemistry of selected nigerian coals for solid fuel combustion
Mohammed. U. Garba, Umaru Musa, Priscilla. E. Azare, Kariim Ishaq, Usman. S. Onoduku and Yahaya S. Mohammad, pp. 646-654

Permeability prediction in wells using flow zone indicator (fzi)
Larry O. Ajana, Efeoghene Enaworu, Oyinkepreye D. Orodu , pp. 640-645

Application of compounding process mathematical model for gasoline quality improving
Igor Dolganov, Emiliya Ivanchina, Irena Dolganova, Anastasiya Solopova and Gaini Seitenova, pp. 635-639

Parametric study on electrical conductivity of crude oils; basis experimental data
Mehdi Mohammadi, Farzad Mohammadi, pp. 629-634

Hydrocarbon potential and exploration in volcanic margins: frontier leads in benue trough of nigeria
J. N. John Onwualu and Kingsley K. Nwozor, pp. 622-628

A current viscosity of different egyptian crude oils: measurements and modeling over a certain range of temperature and pressure
Shaimaa Saeed, Tarek M. Aboul-Fotouh, Ibrahim Ashour, pp. 611-621

Wax content determination through tests and simulation comparison
Igwilo Kevin Chinwuba, Onwugbuchulem Chibunma Vivian, and Ohia Nnaemeka Princewill, pp. 605-610

Alkylation of diphenylamine with alkenes catalyzed by acidic catalysts based on bentonite
Michal Sklenár, Vladimír Danielik, Pavol Hudec, pp. 597-604

Coke formation reduction in the cataltic reforming reactors at the optimal catalyst activity
Ekaterina S. Chernyakova, Emilia D. Ivanchina, Inna V. Yakupova, Margarita V. Vinidiktova, Gaini Zh. Seytenova, pp. 746-752

Mathematical model of advanced refining technology adapted to the feedstock conditions of the republic of Kazakhstan
G. Nazarovа, E. Ivashkina, E. Ivanchina, G. Burumbaeva, A. Svarovskii and G. Seytenova, pp.740-745

Optimization of reactant mixing in benzene alkylation technology
Elena Khlebnikova, Egor Yurev, Elena Ivashkina, Alena Chudinova, pp. 736-739

Cracking of natural bitumen in the presence of nanosized powders mo and cuo
Nikita N. Sviridenko, Evgenii B. Krivtsov, Anatolii K. Golovko, Nadezhda I. Krivtcova, pp.732-735

Bifunctional pt-re reforming catalysts properties modelling
Anton G. Koksharov, Sergey A. Faleev, Ekaterina S. Chernyakova, Emilia D. Ivanchina, Inna V. Yakupova, Vjacheslav A. Chuzlov, pp. 726-731

Optimal design of straight– run gasoline conversion on zeolite catalyst
Marina A. Samborskaya, Inga A. Gryaznova, Vera V. Romanenkova, Olga A. Cherednichenko, pp. 721-725

Electro-explosive iron powders as a catalyst of synthesis liquid hydrocarbons from co and h2 in fischer-tropsch process
Evgeny V. Popok, Albina I. Levashova, Tatyana M. Gladchenko, Nikita P.Burlutskiy, Sergey P. Juravkov, pp. 715-720

Influence of catalyst/feedstock ratio on the yield of light fractions and coke during the catalytic cracking technology
Galina Y. Nazarova, Elena N. Ivashkina, Emiliya D. Ivanchina., Valeriya I. Stebeneva, pp. 709-714

Analysis of droplets formation process in water-in-oil emulsions
Olga E. Moyzes, Natalya V. Usheva, Elena A. Kuzmenko, Ksenia V. Zolotuhina, pp. 705-708

Diesel fuel hydrotreating modelling and calculation of material and thermal balances using data of industrial unit lg-24/7
A. A. Tataurschikov, E. D. Ivanchina, N. I. Krivtcova and A. A. Syskina, pp. 700-704

Determination of optimal temperature of catalytic dewaxing process for diesel fuel production
Nataliya S. Belinskaya, Evgeniya V. Frantsina, Emiliya D. Ivanchina, Natalya V. Popova, Natalya E. Belozertseva, pp.695-699